My father-in-law is a woodworker, and has built some fun furniture for his grandchildren as well as jewelry boxes and clocks for his kids. For his birthday, I decided to make him a gift that will help him keep all… Continue Reading →
My nephew wanted something “Utah State” for Christmas and I wanted to do something with a vinyl record on my X-carve. It worked pretty well, though to be honest the vinyl sort of micro-shattered rather than cut.
While this might not be as fancy as the Weasley’s clock in Harry Potter, it is still a fun way to see what time it is where your kids are. I was commissioned to make this by a neighbor for… Continue Reading →
I decided to try making a “shaped” cutting board / cheese board / serving tray. I thought a fun project to try would be something with inlays, and so a cello came to mind since it has the holes where… Continue Reading →
Doctor Who is one of my favorite shows, it’s campy, sweet, action packed, and fun. With that I mind, I decided to try making some wall hangings using the iconic Tardis (Police Box) and some fun quotes from the show…. Continue Reading →
My wife is a huge fan of Wonder Woman, and collects Wonder Woman related things. I decided to build her a display shelf for her Funko Pop Vinyl Figurines. I designed it in Illustrator, then cut it out on the… Continue Reading →
With Christmas just around the corner, I thought it would be fun to make a nativity set with my CNC machine. I set up each layer with a tab of the same length, so they could be glued together. If… Continue Reading →
I made a leather and wood pencil pouch using my x-carve, leather scraps, and thumbtacks. It turned out pretty well and the new owner loves it. Check out the video below: I learned a couple of things in the build… Continue Reading →
I recently purchased an X-Carve CNC machine; this was one of my first projects. I used Easel and Adobe Illustrator to create the design. Watch the video here: Tools Used: V-Groove Router Bit – http://amzn.to/2DqeLVb 1/8 inch Upcut Router Bit… Continue Reading →
I started this project about 6 months ago, but time got away from me, and I didn’t make any progress for quite a while. I finally finished it and it turned out better than I imagined it would. It currently… Continue Reading →
I built a climbing wall for my kids this past week out of an old piece of vinyl fencing and some leftover pressure treated 2×6’s and 2×8’s. I had a bunch of handholds that had been laying around for a… Continue Reading →
I collaborated with another YouTube creator and made a sketchbook for her. It was fun to do, and she loves it, so win-win. We both did a video, me of the creation of the notebook, and her of using it…. Continue Reading →
I had the opportunity to use a Glowforge recently. It was so much fun, and opened up a world of possibilities. Watch for more videos using the Glowforge, there will definitely be more to come. If you have any ideas… Continue Reading →
I received a gift from my wife for Christmas, A UGears Dynamometer model. I used to make a bunch of plastic models as a kid, but haven’t done a wooden model before. It was nice to not use glue. It… Continue Reading →
My youngest son wanted a bedside table, and my oldest wanted to make a Super Mario Brick Lamp. So I decided to combine the two, and came up with this. The basic measurements are 16x16x16 for the block, and 16×18… Continue Reading →
I was recently commissioned to make a wooden marble track for a friend’s grandchildren. It was constructed out of oak with babinga accents. It was a lot of fun to make, and I had several ideas on how to make… Continue Reading →
A co-worker of mine collects fossils and was looking for something to display some Megaladon (pre-historic shark) teeth. I had some old lumber laying around, and decided to make him a rustic frame using glass from an old picture frame,… Continue Reading →
Once upon a time, I had a 3 car garage. I could work in my garage without moving cars anything else. It was awesome. Currently, my two car garage (which only fits one car) is also my workshop, so I… Continue Reading →
With the holidays just around the corner, I thought it would be fun to make some rustic napkin rings for Thanksgiving Dinner and other holiday festivities. They are super simple, though boring through the branch pieces can be a bit… Continue Reading →
On the trip to Hawaii, I also stopped over at a native/exotic wood store, Aloha Woods, (http://alohawoods.com) and shipped home some fun specimens to use in later projects. I hope you enjoy the video, please comment, like and subscribe to… Continue Reading →
I recently had the opportunity to visit Hawaii with my wife, my siblings, their spouses and my mom. No kids. To put it simply, it was amazing! We took a cruise around the islands, and saw many beautiful vistas and… Continue Reading →
I recently purchased a new tool for my woodworking hobby. The DeWalt DW734 thickness planer. I have gathered several waterbed frames (2×10 and 2×12’s). They are finished with paint, stain, and/or polyurethane. Using a belt sander tends to create heat… Continue Reading →
© 2019 Photokapi.com — Powered by WordPress
Theme by Anders Noren — Up ↑